2000B

SDS：                 Polychem 2000B

Revised date:      2021.10.20   according to GB/T 16483-2008

Version number : M2021003

SDS No.：          ZL2021M003

Initial release date: October 20, 2021

Part 1 Chemicals and Enterprise Identification

Product Name: Polyethylene Wax Polychem 2000B

Recommended uses and limitations: water-based inks, water-based coatings, and gloss oils

Company: Zhongwax (Guangzhou) Co., LTD.

Address: C504, Changsheng Business Center, #26,Daguannan Road,Tianhe District, Guangzhou ,China

TEL: 020-82791842

FAX: 020-26238760  

 

    Part 2 Hazard Overview Hazard Category: Non hazardous chemical

Substances Invasion Route: Inhalation, ingestion, transdermal absorption; Health hazards: Prolonged contact can irritate the skin and respiratory system.

Environmental hazards: This mixture may be harmful to the environment and special attention should be paid to water bodies.

Explosive hazard: non-combustible, non-explosive.

 

Part 3 Composition/Composition Information: General Description: Mixtures

According to the ingredient description in GB 13690-2009:

Constituent substances (components)	content（%）	CAS No.
Polyethylene wax	35%	9002-88-4
Water	60%	7732-18-5
emulsifier	5%	9002-92-0

 

Part 4 First Aid Measures

Eye: Immediately lift the eyelids and thoroughly rinse with plenty of flowing water or physiological saline for at least 15 minutes. In severe cases, seek medical attention.

Skin: Non corrosive, can be washed with water.

Inhalation: No data available.

Ingestion: Drink plenty of warm water, induce vomiting, and seek medical attention.

 

Part 5 Fire Protection Measures

Hazardous characteristics: None

Harmful combustion products: Carbon monoxide, carbon dioxide, unknown organic compounds produced during thermal decomposition

Extinguishing method and extinguishing agent: use foam, dry powder, water mist or carbon dioxide extinguishing agent, sand.

Firefighting precautions: Firefighters should use full body fire protection clothing and wear self-contained breathing apparatus to prevent toxic or irritating gases.

Part 6 Emergency Response forLeakage

Hazardous characteristics: None

Part 7 Operation and Storage

Operation precautions: Close the operation and strengthen ventilation. Operators must undergo specialized training and strictly adhere to operating procedures.

It is recommended that operators wear qualified breathing masks, chemical safety goggles, work clothes that meet industrial hygiene conditions, and rubber oil resistant gloves when necessary.

Stay away from sparks, heat sources, and smoking is strictly prohibited in the workplace.

When handling, it is important to load and unload with care to prevent damage to the packaging and containers.

 Equip corresponding types and quantities of fire-fighting equipment and emergency response equipment for leaks.

Empty containers may contain residual harmful substances.

 

Storage precautions: 

Store in a cool and ventilated warehouse.

Keep away from sparks and heat sources and store at room temperature. It should be stored separately from oxidants and edible chemicals, and mixed storage should be avoided.

Adopting explosion-proof lighting and ventilation facilities.

Prohibit the use of mechanical equipment and tools that are prone to generating sparks.

The reserve area should be equipped with emergency response equipment for leaks and appropriate containment materials.

  

 

 

Part 8 Exposure Control and Personal Protective Measures:

Maximum allowable concentration: China (MAC) No relevant data Testing Method: Engineering Control: The production process is sealed, and the workplace should maintain good ventilation.

Respiratory protection: Wear a qualified respiratory mask if necessary. During emergency rescue or evacuation, air respirators or oxygen respirators should be worn.

Eye protection: Wear chemical safety goggles if necessary.

Body protection: Wear work clothes that meet industrial hygiene conditions.

Hand protection: Follow general preventive measures and, if necessary, use solvent resistant gloves such as rubber gloves.

Other protections: Smoking, eating, and drinking are prohibited in the workplace. Avoid drinking alcoholic beverages before work.

After work, take a shower and change clothes.

 

Part 9 Physical and Chemical Characteristics Appearance: 

Milk white, Bright liquid

Odor: Odor free

Relative density (@ 25 ℃): 0.95

PH value: 9-11

Freezing point/melting point: not required

Boiling point (℃): No data available

Relative vapor density (air=1): No data available

Saturated vapor pressure (kPa): No data available

Combustion heat (kJ/mol): No data available

Critical temperature (℃)： No data available

Critical pressure (Mpa): No data available

Logarithmic value of octane/water partition coefficient: no data available

Flash point: ＞ 100 ℃, not classified as flammable liquid

Explosion limit% (V/V): Not applicable

Ignition temperature: No data available

Lower explosive limit% (V/V): Not applicable

Solubility: soluble in water

Main use: wax lotion, mainly used for water-based paint and water-based ink.

Part 10 Stability and Reactivity

Stability: Stable

Forbidden compound: Strong oxidant

Conditions to avoid contact: open flames, high heat

polymerization hazards: cannot occur

Decomposition products: carbon monoxide, carbon dioxide

 

Part 11 Toxicological Information:

Acute Toxicological Data: Currently No Relevant Data.

Subacute and Chronic Toxicity: Currently No Relevant Data.

Irritation: Temporarily No Relevant Data.

Sensitization: Temporarily No Relevant Data.

Mutagenicity: Temporarily No Relevant Data.

Teratogenicity: Temporarily No Relevant Data.

Carcinogenicity: Temporarily No Relevant Data.

 Others: Temporarily No Relevant Data

 

Part 12 Ecological Data

 Ecotoxicity: No data available

Biodegradability: No data available

Non-biodegradability: No data available

Bioaccumulation or bioaccumulation: No data available

Other harmful effects: No data available

 

Part 13 Abandoned Disposal:

Nature of waste: ■ Hazardous waste □ Industrial waste

Waste disposal method: Control incineration method can be used for treatment

Disposal precautions: No information available

 

Part 14 Transportation Information:

Dangerous goods number: Not applicable

UN Number: Not applicable

Packaging mark: Not applicable

Packaging category: Not applicable

Packaging method: paper bags/plastic woven bags, etc

Transportation precautions: Avoid getting wet.

Transport according to the prescribed route.

 

Part 15 Regulatory Information:

The following laws, regulations, and standards make corresponding requirements for the safe use, storage, transportation, loading/unloading, classification, and labeling of chemicals:

Work Safety Law of the People's Republic of China (December 1, 2014)

Occupational Disease Prevention and Control Law of the People's Republic of China (December 31, 2012)Environmental Protection Law of the People's Republic of China (January 1, 2015)

Regulations on the Safety Management of Hazardous Chemicals (December 2011)

Regulations on Safety Production License (July 29, 2014)

List of Dangerous Goods GB 12268-2005

Chemical classification and hazard disclosure_ General GB 13690-2009

Regulations for the drafting of chemical safety labels GB 15258-2009

Chemical labeling specifications based on GHS GB-T 22234-2008

  

Part 16 Other Information

Filling time: October 20th, 2021

Filling department: Technical department

Data review unit: China Wax Technology (Guangzhou) Co., Ltd

Modification instructions: Format and version changes

Other information: This product safety data guide is based on theory and our company's experiments, and the data provided is for reference only.